Chào mừng bạn đã đến với HỆ THỐNG ĐIỆN NHẸ STAPHONE!

Switch CISCO SG220-26P-K9-EU (24 port 10/100/1000 PoE)

Switch CISCO SG220-26P-K9-EU (24 port 10/100/1000 PoE)

Bộ chia mạng Switch Cisco SG220-26P-K9-EU: 24 10/100/1000 PoE+ ports with 180 W power budget + 2 Gigabit RJ45/SFP combo port
  • Bảo hành: 12 tháng
  • Kích thước: 440x44x250mm - 3.7kg
  • Xuất xứ: CISCO - China
Cam kết
  • Giao hàng toàn quốc

    Cước phí vận chuyển theo thỏa thuận

  • Thời gian giao hàng

    Hàng có sẵn được giao trong vòng 1-2 ngày. Hàng đặt sản xuất trong vòng 7-10 ngày

  • Đổi trả

    Khách hàng được đổi sản phẩm trong trường hợp có lỗi phát sinh từ nhà sản xuất trong vòng 03 ngày kể từ ngày mua

  • Hóa đơn

    Công ty Staphone xuất hóa đơn điện tử cho sản phẩm này

  • Bảo hành

    Sản phẩm được bảo hành theo tiêu chuẩn của hãng sản xuất

Mô tả sản phẩm

Switch Cisco SG220-26P-K9-EU thuộc dòng sản phẩm Cisco Small Business 220 Series. Switch Cisco SG220-26P-K9-EU được thiết kế để hoạt động ở layer 2 trong mô hình OSI. Switch Cisco SG220-26P-K9-EU cung cấp 24 10/100/1000 PoE ports with 180 W power budget, 2 Gigabit RJ45/SFP combo port cho các kết nối LAN tại các doanh nghiệp vừa và nhỏ.


Model SG220-26P-K9-EU
Switching capacity and forwarding rate Capacity in Millions of Packets per Second (mpps) (64-byte packets): 38.69
Switching Capacity in Gigabits per Second (Gbps): 52
Jumbo frames Frame sizes up to 9216 supported
MAC table Up to 8192 MAC addresses
Total system ports 26 Gigabit Ethernet
RJ-45 ports 24 Gigabit Ethernet
Uplink ports 2 Gigabit Ethernet combo SFP
Layer 2 Switching
Spanning Tree Protocol (STP) Standard 802.1d STP support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 8 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 256 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLAN VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-Of-Line (HOL) blocking HOL blocking prevention
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Automatic Media-Dependent Interface Crossover (MDIX) Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.
ACLs Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
Support up to 512 rules
Port security Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication; guest VLAN;
RADIUS, TACACS+ Supports RADIUS and TACACS authentication; switch functions as a client
MAC address filtering Supported
Storm control Broadcast, multicast, and unknown unicast
DoS protection DOS attack prevention
STP Bridge Protocol Data Unit (BPDU) Guard This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
Spanning Tree Loop Guard This feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
Quality of Service
Priority levels 8 hardware queues
Scheduling Strict priority and weighted round-robin (WRR)
Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of service Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate limiting Ingress policer, per VLAN and per port
Power over Ethernet
802.3af PoE or 802.3at PoE+ delivered over any of the RJ-45 network ports within the listed power budgets Switches support 802.3af, 802.3at, and Cisco pre-standard (legacy) PoE with maximum power of 30 W per port.
This applies to the following PoE-enabled models; the maximum number of ports providing PoE power simultaneously is determined by the total PoE budget for the switch listed as below:
PoE Power Budget: 180 W
Number of Ports That Support PoE: 24
Pre-standard PoE Support Cisco Pre-Standard PoE
Intelligent PoE power management Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification
Dimensions (W x H x D) 440 x 44 x 250 mm
Unit weight 3.7 kg
Power 100 to 240V 50 to 60 Hz, internal

Sản phẩm liên quan

Nhận hàng và thanh toán tại nhà
Trả tiền mặt, CK, trả góp 0%
Tư vấn, giải đáp mọi thắc mắc
Dùng thử trong vòng 3 ngày